User Manual

English _33
●● SETUP SCREEN
PTZ SETUP
Digital PTZ
Use this settings page to move the camera view and perform the digital zoom.
1. From the Setup menu, select the <PTZ (
)> tab.
2. Click <Digital PTZ>.
3. Select the number of the split screen to control.
4. Move the jog dial [
] on the Move Screen pad to control
the DPTZ.
• Move Screen : Moves the screen in the direction
corresponding to the jog dial control.
• Move Screen Speed Control : The farther the jog dial is
away from the center, the faster the moving speed is.
5. Control zoom movement.
• Zoom In: Move up the bar in the right of the UI, or press the
[ ] button.
The farther the bar is from the center, the faster the screen expands.
• Zoom Out: Move down the bar in the right of the UI, or press the [
] button.
The farther the bar is from the center, the faster the screen reduces in size.
J
`
The angle of view of 3M Live view is wider than the angle in the preview.
6. Set a DPTZ preset.
7. Set a DPTZ group.
If prompted to add home position
1. Move to the desired starting position in the screen, and click the [ ] icon.
The position will be set as a home position.
2. If you click the [
] icon for the home position, it will automatically move to the home position.
3. Once it is configured, the screen will be located at the home position after rebooting.
To set a DPTZ group
1. Select the number of the split screen to save.
2. Select a preset number to save.
3. Enter the name of the preset to save.
• Add : Saves a preset that has been entered.
• Go : Moves to the position of a selected preset.
• Remove : Deletes the selected preset.
M
`
You can enter a preset name up to 12 characters in length.
`
You can use uppercase letters, lowercase letters and numbers in a preset name.
To set a group
The group function is used to group several presets designated by the user and call them continuously.
1. Select a group number to save.
2. Select a preset number to add to the group.
3. Select a split screen to run.
4. Select an interval to run the saved preset.
5. To add the designated information to the preset list, click the [Add] button.
When you click the [Delete] button, the selected preset is deleted from the preset list.
• Start : Runs the selected group on a designated split screen.
• Stop : Pauses the group in operation on the designated split screen.
• Remove : Deletes the selected group.
• Add : Saves a preset selected from the preset number to the preset list.
• Delete : Deletes the selected preset from the preset list.
• Cancel : Resets the preset list to its state prior to clicking the [Apply] button.
• Apply : Saves the current preset list to a selected group.