User Manual
Table Of Contents
- overview
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _13
! INSTALLATION & CONNECTION
6. Mount the cable bushing to the camera body.
[Installing the Audio/Alarm/Power cables]
7. Mount the cable bushing of the provided audio/alarm/power cables to the camera body.
8. Join the mount plate with the camera body.
4x
TR20
9. Connect the network cable and alarm/power, audio jack to the camera module port.