User Manual
Table Of Contents
- overview
- getting started
- live
- search
- AI search
- play
- setup
- starting web viewer
- live viewer
- Screen Layout of the Live Viewer
- Checking the System Status
- Checking User ID
- Checking Camera List
- Checking the All Camera Status
- Changing the Pattern of Split Screen
- Changing Overall Channel Aspect Ratio
- Full Screen Mode
- Setting up the Live Layout
- Real-Time Event Monitoring
- Live Screen Menu
- Camera Video Control
- PTZ Control
- Exporting Video
- search viewer
- AI search viewer
- play
- setup viewer
- export viewer
- appendix
English _25
Event Search
You can browse events by camera and event type.
To search for a specific event, click <
> to select the event type and camera to browse.
Event filter
Displays only selected events in the event list.
●
Common event : Searches for event types that have occurred in general cameras such as motion detection and
IVA.
●
AI event : Searches for AI event types such as face, person, and vehicle.
■
AI events are only activated when an AI camera is connected.
■
AI events are displayed only after setting event rules. For details, refer to the "Setup > Setting the Event > Event rule setup" page in the Table of
Contents.
Camera filter
Displays events for the selected camera only.
Event Instant Viewer
Select an event to check from the event list, and click < > to play the recorded video at the time the event
occurred.
■
Instant viewer can play an event video for 1 minute.
■
For AI events, the best shot and details of the event that occurred are displayed.
■
AI event recognition may have different settings and operation specifications depending on the recorder model or camera.
■
To see AI events, set any of the following options as necessary : See the relevant page for detailed setup method.
– Setup > Event > AI engine
– Setup > Event > Event setup > Object
– Setup > Event > Event setup > AI recognition
– Setup > Event > Event setup > Mask
– Setup > Event > Event setup > IVA
– Setup > Event > Event rule setup
Common eventAI event
●
/ : The video is played/paused.
●
: Moves to the playback screen.
●
: Instant Viewer playback ends.
Stop Alarm Output
When an event occurs, an alarm can occur. Click < > at the bottom of the screen to stop the alarm output if
necessary.
For details, refer to the "Setup > Setting the Event > Event rule setup" page in the Table of Contents.
• LIVE