Quick Guide

3
Installing the HDD
1
Use the front cover lock key to unlock the cover.
Grab the front cover with both hands and pull it to
the left to remove it.
2
Press the orange button on the hard disk bracket to
the left and pull forward to separate the main body
and the hard disk bracket.
3
Mount a HDD in the HDD bracket and screw it in
using the screws provided.
4
Once the HDD is mounted in the bracket, push the
bracket into the main body and close the front cover.
` Fit the front cover into the right notch of the main body, then
press and close until you hear a 'click'.
` Use the front cover lock key to lock the front cover so that it
does not get separated.
J
` If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD
manually in the set before use.
` For replacement or installation of an additional HDD you must contact your dealer or our customer center.
Installing the Rack
Rack Installation Requirements and Reference Dimensions
Classification Requirements
Rack type 19-inch rack of EIA-310-D standard
POST count 4
POST distance Depth 800 mm
Dimensions of mounting flange
C
B
A
Product
Product
Product width
EIA-310-D standard mounting
flange
• Notable dimensions
Index Dimension
A 450 mm (17.717 inches) min.
B 465 mm (18.307 inches) nominal
C 483.4 mm (19.031 inches) min.
• Flange mounting holes (square holes are recommended for XRN-6410 series)
While EIA-310-D standard allows the mounting flange holes to be round, square, or tapped (threaded),
the XRN-6410 series is only designed to work with round or square holes, but not tapped holes.
• Square mounting holes
15.90 mm (0.625 inches)
15.90 mm (0.625 inches)
12.7 mm (0.50 inches)
9.5 mm (0.375 inches) Square
44.45 mm (1.750 inches)
15.90 mm (0.625 inches)
15.90 mm (0.625 inches)
12.7 mm (0.50 inches)