Quick Guide

6
3
Recorder ID/PW Setup
Sets the administrator's password.
※ Click < > to view the basic guide for setting a password. Refer to the password setup rules.
4
Camera ID/PW Setup
4-1. Set a camera password in factory reset. The initial password for the camera must be entered.
4-2. If ID/PW is already set in the camera, register the ID/PW and click <Next>.
4-1
4-2
※ Click < > to view the basic guide for setting a password. Refer to the password setup rules.
※ When the password is in factory reset, it can be changed and managed in a batch.
※ Up to 3 sets of camera ID with password and password can be registered.
※ You cannot change the password for cameras registered with ONVIF and RTSP.
5
Date/Time Setup
Set the date, time, time zone, and DST and then click <Next>.
6
Camera Register
Registers the searched network cameras.
6-1 Select a camera to register from the searched camera list and click <Register>.
6-2 Select a camera to register from the list and click <Change IP>.
6-3 After completing camera register, click <Next>.
7
Channel Setting
You can view the camera videos registered to each channel in split mode along with thumbnail information. To
change the camera video position, select a video and drag and drop it to the desired location.
8
Click <Finish> to complete the Install Wizard.