User Manual

50_ setup
setup
Setting Camera Password
You can change the passwords of all registered cameras at once.
You can register the camera’s ID and password.
Setup > Camera > Camera password
• Password : Input a new password according to the password setting rules.
• Confirm password : Input the new password again.
• ID : Enter the ID of the camera whose ID and password are set.
• Password : Enter the password of the camera whose ID and password are set.
` If you click < >, a basic guide for password setup is displayed.
` If you select <View Password>, the current password is displayed as the actual input characters.
` If you check the <Change the password of all registered cameras>, the passwords of all cameras are changed with the
entered password.
` A camera password registered with ONVIF and RTSP cannot be changed.
SETTING THE RECORDING
You can setup scheduled recording, event recording and other recording related settings.
Recording Schedule
If you set a recording schedule for a specific date and time, the recording will start at that specific time.
Setup > Record > Recording schedule
• Channel : Select the channel you want to set.
• All : The entire time range (Monday through Sunday including holidays, AM 0~ PM 23) will be reserved with the
same recording schedule.
• Apply to CH : If you select <Apply to CH>, “Apply to CH” confirmation window will appear.
After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected
channels.
` Event recording and scheduled recording starts about 3 seconds prior to the event/schedule for guaranteed recording.
Record setting by the color
Color Function Description
White (
)
No Recording No schedule / event recording
Light green (
)
Continuous Scheduled recording only
Red (
)
Event Event recording only
Orange (
)
Both(Cont&Evnt) Both scheduled / event recordings
• Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>-<Both(Cont&Evnt)>.