User Manual

80_ starting web viewer
starting web viewer
INSTALL WIZARD
As shown below, proceed through each step of the <Install Wizard>.
Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <Exit>.
` When you complete installation using the install wizard on your recorder, the install wizard will not appear on your web viewer.
1. In the <Language> screen, select the language and press the <Next> button.
2. Set the camera password in factory reset on the <Camera password> screen.
If ID/PW is already set in the camera, register the ID/PW and click <Next>.
` When the password is in factory reset, it can be changed and managed in a batch.
` Up to 3 sets of camera ID with password and password can be registered.
` You cannot change the password for cameras registered with ONVIF and RTSP.
3. Set the network connection type and the connection environment on the <Network> screen, and then click the
<Next> button.
` For details on network settings, refer to the "Getting Started > Install Wizard" page in the Table of Contents.
4. Set the standard time zone and daylight saving time on the <Standard Time Zone> screen, and then click <Next>.
5. To modify the date and time on the <Date/Time> screen, select the <Modify> check box.
Set the date and time, and then click <Next>.
6. Click the <Next> button to complete the Install Wizard.