AH68-01614B(Rev 0.0) - MP3, WMA, ASF Playback - Removable Storage Device - USB 2.
Contents I Preparations Safety Instructions................................................................................................................................................4 Features ..............................................................................................................................................................6 Components ...............................................................................................................................................
Safety Instructions Safety Instructions Read and understand all the instructions to avoid injury to yourself and damage to the equipment. Do not expose to extreme temperatures (above 95°F or below 23°F). Do not expose to moisture. Do not subject the unit to severe impact, or place heavy objects on it. Do not let any foreign matter spill into the device. I Cautions for Use Follow Traffic Safety Instructions ● Do not use the earphones while driving an automobile or riding a bicycle.
Feature Feature MP3, WMA, ASF Playback Direct MP3 Recording MP3 is an MPEG1 Layer3 audio format. ● WMA is a Microsoft Windows Media audio format. ● What is ASF? ASF is a file format used in Windows Media player and consists of various kinds of content. The player can also play back audio ASF. ● ● FM Reception ● Removable Storage Device ● You can easily copy and paste files to the player using Windows Explorer. USB 2.0 Support ● ● You can make high quality voice recordings.
Components Location of Controls Earphone Jack Battery Cover Neck strap Hook Earphone Player Carrying case One Battery Neck Strap Installation CD User manual Line In Cable ➡ Hold Switch Model YP-53 H YP-53 V YP-53 X YP-53 Z Built-in memory 128MB 256MB 512MB 1GB ● The capacity of the useable built-in memory is less than indicated as the internal firmware uses a part of the memory as well. ● Design of accessories is subject to change, for the purposes of improvement, without notice.
Location of Controls Connecting to PC System Requirements. I Display Equalizer, SRS indicator Play mode indicator The PC system must meet the following specifications: Hold indicator Play/Stop/Pause indicator Remaining Battery Power indicator Artist indicator Track indicator Bitrates indicator Track Number indicator ● Pentium 133MHz or greater ● Windows 98 SE/ME/2000/XP ● 40MB of available hard disk space ● CD-ROM drive (double speed or greater) ● USB port (2.0) supported ● DirectX 8.
Connecting to PC Connecting to PC 2 Complete the installation by following the instructions in the order as they I Connecting the player to PC with USB cable appear in the windows. 1 Connect a USB cable to the USB port on the computer. 2 Connect the USB plug of the player to the opposite side of USB cable. N N You can directly connect the USB plug to the USB port of PC.
Connecting to PC How to check USB driver Windows 98: Control Panel ➝ System ➝ Device Manager ➝ Disk Drives ➝ Samsung yepp YP-53 Windows 2000: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Disk Drives ➝ Samsung yepp YP-53 USB Device Windows XP: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝ Disk Drives ➝ Samsung yepp YP-53 USB Device Manual Installation of USB Driver Go to “Downloading/Uploading files” if the USB driver is in place.
Manual Installation of USB Driver 4 After selecting the driver, click on [Update Driver]. Manual Installation of USB Driver I In Windows 98 Click [Next] button in the series of windows that appear. N N USB driver location [CD ROM]\setup\Drivers 5 Select a compatible driver, click on [Next] to finish. N : To complete the installation, make sure to restart your PC. ✍ Note - You cannot use it as a removable disk in Windows 98 if the YP-53 program is not installed.
Using the removable storage(PC) I Downloading/Uploading files 1 Connect the player to your PC. 2 Open Windows Explorer on PC. ● Removable Disk is displayed in Windows Explorer. 3 Select the file you want to save, then drag and drop it to the removable disk. Using the removable storage(PC) 2 Select the USB device, and then press the [Stop] button. When the [Stop a Hardware device] message appears, press the [OK] button and disconnect the USB cable.
Installing yepp Studio To View Help on yepp Studio yepp Studio is the program that can convert and play back the music files in PC. 1 Insert the Installation CD into CD-ROM drive. 2 Select language Select [Install yepp Studio]. Run yepp Studio and press F1. ● Help will appear. Move the arrow to the top of yepp Studio and right click on the mouse. The following selection window will appear. ● Click on Help and the Help window will appear.
Playing Music and Turning Off the Device I Turning Power On and Off Power On : Press the √/ ❙❙ button to turn on the power. Power Off : Press and hold the √/ ❙❙ button to turn off the power. I Playing Music Press the √/ ❙❙ button. Adjusting the Volume/Hold Function I Adjusting the Volume Press the volume. , during playback to adjust the ✍ Note - Volume ranges from 00 to 30. ● Playback starts. I HOLD Function In Hold mode, all buttons are disabled.
Recording Voice 1 Slide the MP3 Encoding switch to the ENC position to begin Voice Recording. 2 To stop the recording, move the 1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable. switch in the opposite direction and a new voice file will be created. Recording Time Remaining Time 2 Slide the ✍ Note - The files are recorded in the order of V001,V002......, and saved as WAV file in the VOICE folder after recording.
Searching for Music/Voice Files To search for specific parts during play ● Pull and hold the ❙œœ , √√❙ to the left or right during playback to search for the part you want to listen to. ● Release the key to resume play normally. To change tracks during play ● Pull the √√❙ briefly during playback to play the next track. ● Pull the ❙œœ briefly within 5 seconds after playback starts to move to and play the previous track.
Listening to FM Radio FM Encoding I Searching Stored Frequencies 1 Press the √/ ❙❙ button in FM Mode. ● PRESET screen will appear. 2 Use the ❙œœ , √√❙ 1 Slide the switch to the ENC position during FM reception. ● Encoding of the currently transmitted FM broadcast begins. to move to the frequency you want. 2 Slide the I Deleting Stored Frequencies - After moving to the PRESET number you want to delete, press and hold the key. switch to REC. ● A file is created and the encoding stops.
Loop Repeating Starting Point While playing music files, press the A↔B button briefly at the beginning of the loop you want to set. A↔ appears in the display. Setting up MENU Press the Use the want. key to switch to MENU mode. , to move and press the Press and hold the key briefly to select the menu you key to exit the MENU mode. Ending Point Press the A↔B button briefly again to set the end of the loop. A↔B appears in the display. The loop is played repeatedly.
Using Navigation You can easily search for files or switch modes using the Navigation function. 1 Press and hold the or press the key to enter Navigation mode. key to move to Menu and then select Navigation in Menu. Using Navigation I Playing/Releasing Folder Playing Folder 1 Press and hold the 2 Select the file or folder that you want to play. key to move to the Navigation mode. ● ❙œœ : When moving to a higher-level folder. ● √√❙ : When moving to a lower-level folder.
Setting Playlist Setting the Advanced Functions 1 Select Settings in the MENU. (refer to “Setting up MENU”) I Setting Playlist - Move to the file you want in Navigation mode and press the key. ● To release the playlist setting, move to the marked file in Navigation mode and press the 2 In Settings, use the , to move to the function you want and press the key to select. ● The selected file will be marked. ● To move to a previous menu, use the ❙œœ or select Return. key again.
Setting the EQ mode Managing Files Select File Manage in Settings. 1 Select Equalizer in Settings. 2 In Equalizer, use the , I Deleting to move to the sound mode you want and press the key. ● SRS ( ): You will hear 3D Stereo sound. ● TruBass ( ): This is a bass boost feature that adds fullness to the sound. ● WOW: This feature allows you to enjoy the SRS and Trubass features simultaneously. ● If you want bass boost, select DBB. 1 Select File Delete in the File Manage.
Display Time Select Display in Settings. Scroll ● Use the , to set the scroll speed. ● The setting range for the scroll speed, which adjusts the speed of the track title flow, is 0 to 10. Information ● Play time: Indicates current play time ● Remain time: Indicates remaining play time ● Used size: Indicates used memory ● Free size: Indicates remaining memory Backlight ● Use the , to set the LCD Light-On time. ● The setting range for Light-On Time is 0 to 9 seconds.
REC Settings Select REC Settings in Settings. Bitrate ● Use the , to set the encoding bit rate you want. ● When encoding music into an MP3 file, you can select one of the following bit rates: 32Kbps, 48Kbps, 64Kbps, 96Kbps and 128Kbps. WOW Level Select WOW level in Settings. Adjusting SRS and TruBass LEVEL ● If you select SRS Level or TruBass Level in the WOW level menu, you can adjust the SRS and TruBass level. ● Use the , to select the level you want.
Default Volume MENU Table Select Default Volume in Settings. Default Volume MENU ● Use the , to set the Default Volume value. ● It is possible to set the default volume to a value between 0 and 30(MAX). If the power is turned on again after having adjusted the volume above the default value, music is played at the default volume. ● If the power is turned on again after the volume was set to within the default value, the music is replayed at the previously played volume.
Troubleshooting Troubleshooting The software doesn’t work The player keeps being turned off. ● Refer to the system Requirements. ● In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings). ● Check to see if there are files saved in it. The player does not work and the LCD displays nothing.
Specifications Model Built-in Memory capacity Voltage Playing time Dimensions/Weight Case Noise Ratio Earphones Jack Output Power Output Frequency Range Operating Temperature Range FM Frequency YP-53 128MB(YP-53 H), 256MB(YP-53 V), 512MB(YP-53 X), 1GB(YP-53 Z) 1.5V X 1 (AAA/LR03 size alkaline battery) lasts up to 20hours (Alkaline battery, MP3 128Kbps, Vol level 20) 27 X 87 X 21 mm / 33 g (without battery) Plastic 88dB with 20KHz LPF 10mW/CH (16 Ω) 20Hz~20KHz -5 ~ +35°C(23 ~ 95°F) 87.50 ~ 108.
