Owner`s manual

rting setup

The STARTING SETUP function makes installing your unit easily. It leads you

the Language selection, TV/CABLE selection and auto channel memory

automatically.

IMPORTANT: Make sure that the antenna or cable TV system connection

is made!

POWER

A/v

ENTER

CANCEL

Press POWER.

The starting setup function begins and the

Language setup menu appears on the screen.

Press • or • to select your desired language,

then press ENTER.

POWER

Press • or • to select "TV" or "CABLE", then

press ENTER.

Press • or • to select "START", then pressENTER.

If you select "CANCEL" and press ENTER, the

STARTING SETUP stops and changes to the TV

screen.

Now the "CH PROGRAM" and "AUTO

CLOCK'starts.

After the starting setup is completed, the TV

channel appears on the screen.

Notes:

• The starting setup function will work only when you press

POWER for the first time.

• In "AUTO CLOCK" setting, it may take more than 10 minutes

to read the EDS signal for one channel, which has only "Time

of day" or "Local time zone".

• The process of "CH PROGRAM" may take 15 - 30 minutes

to complete, depending on your regional cable service.

• If you press CANCEL in the process of "CH PROGRAM",

you can do starting setup function again.

{t}

5V60101A [E]p19-22 19 _ 2/22/06, 1:03 PM