User guide

COLOR DOME CAMERA SUD-3080
18
COLOR DOME CAMERA SUD-3080
19
No. Line Color Camera to Power Supply Power Supply to Receiver
1 White+Orange VIDEO (+)
CH1
VIDEO (+) / RS-485 (+)
2 Orange VIDEO (-) VIDEO (-) / RS-485 (-)
3 White+Green RS485 (+)
CH2
VIDEO (+) / RS-485 (+)
4 Blue POWER (-) VIDEO (-) / RS-485 (-)
5 White+Blue POWER (+)
CH3
VIDEO (+) / RS-485 (+)
6 Green RS485 (-) VIDEO (-) / RS-485 (-)
7 White+Brown POWER (+)
CH4
VIDEO (+) / RS-485 (+)
8 Brown POWER (-) VIDEO (-) / RS-485 (-)
Copper Connector
UTP Coating
The SUD-3080 uses UTP cable to receive its power (AC24V/AC28V) from the Power Supply.
Therefore, a separate adapter is not required. Please refer to the RJ-45 Connector
Schematic Diagram.
RJ-45 Connector Schematic Diagram
Connection
• Coaxial Communications System
• OSD Control method
Using Coaxial Communications
Distance Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
• It is recommended that pure copper coax cable is used and not copper coated
steel, as this will cause issues with the communication over the coaxial cable.
Notes
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT
k}k
DVR
•
: BNC
•
---- : RS-485