User guide

COLOR DOME CAMERA SUD-3080
36
COLOR DOME CAMERA SUD-3080
37
Operating Your Camera
úMOTION : Select motion types to detect.
Ⱂ OFF : Not being used.
Ⱂ DETECTION : Since the camera detects motion without any additional external
sensor, you can monitor activity more efficient.
Ⱂ TRACKING : Commands the camera to detect and
trace a moving object.
Ķ FENCE : You can select up to 4 FENCE.
Ķ MODE : Determines whether to use the fence
selected in the FENCE.
Ķ TYPE : Two types, line and area, of fences are
available.
Ķ COUNT : Displays the number of times that an
object enters or leaves a fenced area.
Ķ FILL : Fill or remove color from the FENCE.
Ķ POSITION : Defines the position and detection direction of a line or fenced area.
1) LINE FENCE
-
SEL POS : Selects a position from POS1,POS2.
- X POS / Y POS : Adjust the size and position of the selected line fence.
- DIRECTION
Ⱂ DIR1 : Detects objects moving left to right on the fence line.
Ⱂ DIR2 : Detects objects moving right to left on the fence line.
Ⱂ DIR1/2 : Detects all objects moving crosswise on the fence line.
-
 RETURN : Select this to save the POSITION menu settings and return to the
TRACKING menu.
2) AREA FENCE
- SEL POS :
Selects a position from POS1 ~ POS4.
- X POS / Y POS : Adjust the size and position of the selected area fence.
- DIRECTION
Ⱂ IN : Detects objects entering the fenced area.
Ⱂ OUT : Detects objects exiting the fenced area
Ⱂ IN/OUT : Detects all objects entering and exiting the fenced area.
- RETURN : Select this to save the POSITION menu settings and return to the
TRACKING menu.
Ķ RETURN : Select this to save the TRACKING menu settings and return to the
INTELLIGENCE menu.
•A detection (FIXED/MOVED) error may occur if :
· multiple motions occur continuously in random directions
· a fixed object moves in one position continuously
· a second object screens the first moving object
Notes
ú DETECT BOX : Outlines an object on the screen in a box when its movement
matches a custom Motion Type.
ú
ALARM OUT : Releases a signal from the MD Output Terminal of the External Cable
when an object’s movement matches a custom Motion Type.
ú DETECT AREA : Defines the Motion Detection area.
ú MASK AREA : Specify a detection exception area to
mask.
Select a mask area number and specify
the size and position.
Ķ AREA : You can select up to 4 areas.
Ķ MODE : Determines whether to use the area
selected in the AREA.
Ķ TOP / BOTTOM / LEFT / RIGHT : Adjust the size and position of the selected area.
Ⱂ FIXED/MOVED : Detects an object that emerges or disappears from the screen, or
stays onscreen without movement .