User guide

COLOR DOME CAMERA SUD-3080
14
COLOR DOME CAMERA SUD-3080
15
1) You can adjust the camera to any direction by using Pan, Tilt, Rotate mechanism.
• Pan Bracket moves by 170° in each direction or 340° on the whole.
• Tilt Base covers total 73˚ angle(0˚ ~ 73˚).
• The angle range of the Rotate Body is the same as that of the Pan Bracket. But one
direction range is 195° and another is 145°
2) Methods of adjustment
• Mounting on a wall

➊
After mounting the camera on a wall, adjusting the panning angle so that the camera can face the direction
to monitor when tilted.

➋
Adjust the tilting angle by rotating the tilt base.

➌
Loosen the rotate base hold screw and adjust rotate base for the best view.

➍
Tighten the rotate base hold screw.
• Mounting on a ceiling

➊
After mounting the camera on a ceiling, adjusting the panning angle to the correct viewing position by
rotating the pan base.

➋
Adjust the tilting angle by rotating the tilt base.

➌
Loosen the rotate base hold screw and adjust rotate base for the best view.

➍
Tighten the rotate base hold screw.
Adjust the panning and tilting, rotating while watching the monitor
73˚
145˚ 195˚
170˚
170˚
Pan Base
Tilt Base
Rotate Base
Installation
1) Unlock the zoom(focus) handle by turning anti-clockwise.
2) Adjust the zoom(focus) by moving the handle to WIDE(FAR) or TELE(NEAR).
3) After adjustment, tighten the zoom (or the focus) handle, taking care that the adjusted
position does not change.
Adjusting varifocal lens zoom and focus
Zoom Handle
Focus Handle
FAR NEAR
WIDE
WIDE
TELE
TELE
You can use the External Cable provided with camera as the following features.
Connecting External Cable
➊
MD Output Terminal : Motion detection signals are output through this terminal.
➋
D & N Input Terminal : You can switch to Day & Night Mode by connecting an external
signal to this terminal.
➌
Ground Terminal
R
E
D
(M
D
_
O
U
T
W
H
IT
E
(E
X
T
_
D
N
)
B
L
A
C
K
(G
N
D
)
➊
➋
➌