User guide
COLOR DOME CAMERA SUD-3080
16
COLOR DOME CAMERA SUD-3080
17
Connection
2. UTP Receiver Link Setup(Additional Power input is needed)
SUD-3080
Ą 1Ch Passive Receiver Ą DVR Ą Monitor
1Ch Passive Receiver
225m(750ft) or Less
System Diagram
1. SUD-3080 Ą 4Ch Power Supply Ą 4Ch Receiver Ą DVR/Monitor/Controller
The maximum power transmission distance for the camera is 300m(1000ft), and the
distance between the camera and the 4ch Receiver cannot exceed 900m(3000ft).
C
H
1
C
H
2
C
H
3
C
H
4
300m(1000ft) or Less
900m(3000ft) or Less
SCC-3100A
SUD-3080
RS-485
SPU-400
SPU-400R
VIDEO
UTP CABLE
BNC CABLE
RS-485
UTP Power Supply Link Setup
➊
➑
➑
➊
No. Line Color Camera to Power Supply Power Supply to Receiver
1 White+Orange VIDEO (+)
CH1
VIDEO (+) / RS-485 (+)
2 Orange VIDEO (-) VIDEO (-) / RS-485 (-)
3 White+Green RS485 (+)
CH2
VIDEO (+) / RS-485 (+)
4 Blue POWER (-) VIDEO (-) / RS-485 (-)
5 White+Blue POWER (+)
CH3
VIDEO (+) / RS-485 (+)
6 Green RS485 (-) VIDEO (-) / RS-485 (-)
7 White+Brown POWER (+)
CH4
VIDEO (+) / RS-485 (+)
8 Brown POWER (-) VIDEO (-) / RS-485 (-)
UTP CABLE
The camera uses UTP cable for transmitting video signals, power and transferring RS-485 control
data.(TIA/EIA-568B)
• Using the product with third-party UTP peripherals may result in degradation of product function
and performance.
• Attenuation and distortion in signal may occur if the maximum transmission distance is exceeded.
Please note that depending on the installation environment/condition, the signal may become
attenuated and distorted and cause the camera to function incorrectly even when the transmission
distance is within the maximum.
• If using RS-485 communication, please use the SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P,
BOSCH, HONEYWELL, VICON and PANASONIC Protocol.
• If you are using the 1Ch Passive Receiver system setup, please connect the adapter (AC 24V or DC
12V) directly to the camera.
Notes