Service manual

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
6-3
This Document can not be used without Samsung's authorization
6-2. Disassembly
1. Loose the four screws at the rear cover.
2. Open the rear cover from bottom-side hook.

caution
1. Do not scratch at rear cover & front.
1. Loose the fixed screw at sim braket.
2. Separate the sim Assay at B'D.
3. Disconnect the LCD connector at B'D.

caution
1. Handle with care SIM F-PCB & LCD F-PCB.
2. Do not come off SIM BRACKET EMI metalization.
1. Seperate the PBA at front.
2. Take off KEYPAD.
3. Remove the FRONT HOLE TAPE/ HINGE TAPE.

caution
1. Do not scratch at rear cover & front.
2. Handle the PBA scratch or crack with care.
1. Insert the removal JIG at HINGE HOLE.
2. Seperate front & hinge after opening the left
front, Drawing out LCD FPCB t o front hole gap.
3. Remove the screw cap by tweezers.
4. Taking to pieces screw of folder lower.
(2 POINT)

caution
1. Do not damage the hinge hole by removal JIG.
2. When separate the front & folder, Check NO
bending.



Diassembly FOLLDER


 
 




  


 
 

 

