User's Manual

MP9320 V2.8 User’s Guide
26
Modifying Tags
RF Command Suite can be used to modify previously programmed tag data. To modify
tags, perform the following:
1. Select the Tag Summary Interface and right-click on the tag.
Figure 19–Select Tag to Modify
2. Select Modify Tag. The tag data window is displayed.
Figure 20–Modify Tag Option
3. Select the Address from the pull-down.
4. Enter the data Length and actual Data for the specific address
5. Select if ASCII data and whether or not there is a Single tag in field.
6. After all data and parameters are entered, press Write .
7. Repeat for each address.