User's Manual

MP9320 V2.8 User’s Guide
44
Updating Reader Firmware with RF Command Suite
Periodically, SAMSys releases updated reader firmware that incorporates new
protocols, enhanced features, and updated FlashROM images. SAMSys readers
can be updated with new firmware using RF Command Suite. Refer to the RF
Command Suite Users Guide for detailed information on this application.
Figure 30–Firmware Upload System Configuration
Receiving Updated Firmware from SAMSys
Updated firmware is available by contacting SAMSys customer support. The
firmware file has a .chp extension and is typically included in a zipped release file
such as “EPCReader_1.36.10.zip”
Copy the files to a PC or other host computer connected to the reader.
Uploading Firmware with RF Command Suite
When uploading a file, RF Command Suite sends one line at a time and waits for
the
{a response from the reader before sending the next line. If an e: is received,
indicating an error, the upload aborts.
To upload firmware to a reader, perform the following:
1. Connect the reader to the PC using the RS-232 or Ethernet port as required.
2. Start RF Command Suite.
3. Select the
Command interface window and turn off the RF output by pressing
the
RF Off function key.
4. Select the Upload File tab.
5. Browse to the file to upload. To use the directory navigator, press the Browse
button .
RS-48
5
D
igital
I
/O
MP9320 2.8 EPC
U
HF Reader
Fault
Power
Sense
Transmit
Active A
n
t
enna
1
2
3
4
The P
ow
er to C
h
o
o
s
e
TM
P
ower
(15 Vdc 3.0 ampma
x)
E
the
rnet LAN
RS-232