User's Manual
Table Of Contents
- Contents
- Figures
- Introduction
- Installation and Setup
- Low-Power UHF Antenna Installation
- Reader Mechanical Installation
- Reader Electrical Installation
- Installing the System Connector Ribbon Cable
- Installing the RF Command Suite Application
- Ethernet LAN Communication Setup (MP9310-NE/EE Only)
- Setting Transmit Power - TD0
- Setting Antenna Gain - TG0 (MP9310-E/EE only)
- Digital Input/Output Setup
- Operation
- Troubleshooting
- Specifications
- Tag Programming
- Configuring the IP Address
MP9310 User’s Guide
24
Reader Specifications
Parameter Value
Frequency
(North American)
902 to 926 MHz
(Model MP9310-N and MP9310-NE)
Frequency
(European Union)
865 to 869 MHz (Model MP9310-E and MP9310-EE)
Frequency Step Size 25 kHz programmable
Frequency Accuracy +/- 10 ppm
RF Power 0.002 to 0.5 Watt (conducted)
RF Impedance 50 Ohms, nominal
Connections RS-232, Digital I/O (TTL), Ethernet LAN
Input Voltage 5.0 Vdc +/-10%
Input Current 2.5 Amp maximum
Enclosure Material Aluminum
Case Dimensions
(w/o Ethernet)
.854 in x 2.756 in x 7.943 in
(21.7 mm x 70.0 mm x 201.7 mm)
Case Dimensions
(with Ethernet)
1.300 in x 2.756 in x 7.943 in
(30.0 mm x 70.0 mm x 201.7 mm)
Mounting holes M3-6 inserts on 2.176 in x 7.303 in spacing
(55.3 mm x 185.5 mm)
Weight (approx) 11.1 oz (316 g)