Installation Manual

7
Reader Mechanical Installation
The MP9320 is designed for easy installation. The following instructions provide the
information to install your UHF reader.
As shown in Figure2, the reader is designed for horizontal or vertical installation.
Mounting keyholes are provided on each side of the base plate for easy, non-
permanent, installation and removal.
Caution
To ensure proper cooling of the reader, verify that the fan intakes and vents are free
of obstructions.
Figure 2–MP9320 Reader Installations
For horizontal or table mounting, ensure the reader and all cabling is secured to the
surface or frame.
SAMSys recommends that the MP9320 be mounted on a horizontal surface.
However, if vertical surface installation is required, refer to the following sections for
the appropriate mounting. As shown in Figure3, keyhole slots are provided for easy
installation and removal.