Programming Guide

Reader Configuration
57
Protocol Select Word (PSW)
The PSW selects the protocols to be scanned by the reader. The
data word is a bitmap of the tag types to be scanned in RF
Continuous mode and in response to serial commands.
To select a tag type, set the appropriate bit to “1”. The bit
assignments for the various tag types are shown in the following
table. The name is the tag type name returned by the reader after
executing the “Rd” command.
Tag Type Name Bit #
EMM 4102 32cpb Manchester T_EM 0
EMM 4102 64cpb Manchester T_EM 0
EMM 4102 32cpb Differential Biphase T_EM 0
EMM 4102 64cpb Differential Biphase T_EM 0
EMM 4025 32cpb EM432 1
EMM 4025 64cpb EM464 1
Philips HiTag1 PHT1 2
Texas Instruments TIRIS, Single-Part, Read Only TRSR 3
Texas Instruments TIRIS, Single-Part, Writable TRSW 3
Texas Instruments TIRIS, Multi-Part TRSM 3
Temic (Atmel) e555x set for 32 cpb T_EM 4
Temic (Atmel) e555x set for 64 cpb T_EM 4
Temic (Atmel) e555x set for 128 cpb T_EM 4
Texas Instruments TagIt TGT 5
ISO 15693 IS15 6
Philips Icode ICP 8
ISO 18000-6A IS186A 10
ISO 18000-6B IS186B 11
EM 4022, EM 4222 STG 12
Other or Unknown unk —