Quick Guide

3. QUICK GUIDE
1) Press the power switch at the bottom of the robot to turn on the power.
2) When starting the robot for the first time or after restoring the local factory settings, touch the screen to start the wizard,
then go through all proposed steps, i.e. Start-up loading, Choose menu language, Robot self-introduction (you can
choose to skip the cartoon), Agree terms for usage, Choose your WIFI and input the password, Choose screensaver role,
Show the password of administrator, Scan OR code by mobile App “Q-Link” to add the robot as admin (you can skip
this step), Other settings, Finish. (Please refer to the actually displayed interfaces)
3) Touch the screensaver of the robot, all functions can be used by everyone as default. If you want to assign the
permission for general user, and they only can operate the authorized function, please access “Permission” and choose
“One key activate permission” to input the admin Q-link account password, then you can activate the function. After
that, every time when you start the robot, you should input the login password (the default password is “admin”) and
then you can use appropriate permissions function.
4) Click the hover button to return to previous menu or return to screensaver of the robot. Touch and hold the hover
button and an adjustment window pops up, you can adjust volume, return to the screensaver, adjust brightness and
prohibit the robot from being roused by sound of surroundings.
5) You can also use voice to communicate with our robot.
i. Wake-on-voice:
The ear light goes out when the robot is in sleep state. Speak the robot’s name “Hello, Sanbot” or “Hi, Sanbot” to
waken it and the ear light turns green. Now you can control the robot by voice command (see table) and chat with
it if it is connected to the network.
Notes: You are able to waken the robot within 4 meters around it. But it may be affected by the ambient noise.
The best way to waken the robot is that you directly face the robot in a distance about 1.5 meters. The robot will
get into sleep if it doesn’t detect voice within 10 seconds to 30 seconds after it is wakened.
ii. Voice Command:
The robot can directly respond to those commands with wake-up words, for example, “Hello, Sanbot” or “Hi,
Sanbot”, Sing a song”.
Only in the wake-up state, the robot can respond to those commands without wake-up words, for example, “play
music”.
iii. Control Command:
Function Voice Command
Awaken robot “Hello, Sanbot” or “Hi, Sanbot”
Voice interruption Keep silent, stop talking (Silent mode), Be quiet (Sleep state)