Instruction Manual

GENERAL OPERATIONS
1. TRANSMITTING RANGE
● The talk range depends on the environmental and terrain. It will reach (up to about 5km) in wide open spaces,
without obstructions such as hills or buildings. Don’t try to use two units which are less than 1.5m (5feet) apart.
If you do, you may experience interference.
2. POWER ON/OFF
●Rotate the PWR/VOL control knob clockwise until a" ka-ka "sound is heard to turn on the power.
When you receive calls ,the knob provides you the ability to change the volume for your listening
habits.When shutting down the radio,you need to rotate it counterclockwise a "ka-ka"
sound is heard.
3. MAKING COMMUNICATIONS
The radio has 22 main frequencies and 121 CTCSS/CDCSS codes
You can communicate with any other user who is using the same combinations, providing they are within range.
4. SPEAK TO OTHER RADIO
● Press & hold the PTT key, LCD TX icon indicating the radio is transmitting.
● Hold the radio in a vertical position with the microphone 3-5 cm from your mouth and then speak.
● When you finish speaking, release the PTT key.
5. LISTEN TO OTHER RADIO
● The radio will automatically sound received signal from the other radio with the same channel and code, and
meanwhile LCD shows the icon RX