USE AND CARE GUIDE 5 LIGHT WOOD BEAD CHANDELIER THANK YOU We appreciate the trust and confidence you have placed in, through the purchase of this item. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information ....................................................................................................................................... 2 Warranty ...................................................................................................................................................... 2 Pre-Installation .........................................................................................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This item requires the use of five 120V, 60Hz, 60-Watt max, candelabra base type B bulbs (not included). Do not exceed the recommended wattage.
Pre-Installation (continued) PACKAGE CONTENTS A B C D E F G Part Description Quantity A Column assembly 1 B Upper pole 1 C Metal ring 1 D Lower pole 1 E Fixture body 1 F Wood bead strings G Wood lower ball 28 1 4
Assembly instructions 1. Assembling the fixture body □ Carefully unpack the fixture, lay out all parts on clean surface. □ Screw the lower pole (D) to top of the fixture body (E). 2 Preparing the light fixture to hang □ Attach the quick link (KK) to one end link of chain (JJ) and attach the quick link (KK) to the chain loop. □ Screw the metal ring (C) to top of the lower pole (D). □ Remove the excess chain links from the chain (JJ) in order to achieve the desired length for hanging the fixture .
Installation instructions 1 2 Installing the cross bar CAUTION: Ensure the power is off at the main fuse box prior to beginning installation. □ Turn off the switch at the wall. □ Turn the power off at the main fuse box. □ Install the cross bar (BB) with nipple (FF), lock nut (DD) to the outlet box using two outlet box screws (CC). □ Unscrew the screw collar nut (II) from the screw collar loop (HH).
Installation instructions (continued) 3 Hanging the light fixture & Installing HH GG the bulbs II □ Push all excess wires into the outlet box. □ Raise the canopy (GG) to the ceiling and secure in place by screwing the screw collar nut (II) onto the screw collar loop (HH). □ Prior to installing the bulbs, please inspect sockets for silica packet, if packet is present, remove and throw away, do not expose to children and pets.
