Installation Guide

Assemble the left side slat (C1) with the groove facing right.
Lay all middle slats (C2) next to C1 with the groove facing right.
Lay the right side slat (C3) to the right of the last C2 with the tongue facing left.
2.
Place the right side stile (A2) beside the assembled slats and rails with groove facing left.
Slide to the left to cover the top and bottom rail tongues and the edge of the slat assembly.
Insert carriage bolts into holes on the right side of A2, use hey key to fasten carriage bolts to
the pre-installed anchors in B1,B3 and B2.
3.
C1 C2
C2
C2 C3
A2
C1 C2C2 C2 C3
B1
B3
B2
A1
C1 C2 C2 C2
A2
C3
C1 C2 C2 C2 C3
B1
B3
B2
A1
4