Bi-Fold Barn Door Hardware Single door hardware kit includes Double door hardware kit includes Instruction Manual Part Name 3.3FT 4.
Prepare and Install the Tracks Draw Line for the Track, Drill Track Holes a. Place the rail against the wall,Using a level, draw a line for the Track, and use a pencil to mark where the holes should be.Make sure the height of holes on the wall (H+65mm) Note: Concrete wall: Drill holes by using a drill bit. Wood framed wall: Drill out the holes by using a drill with 1/4” (mandrill bit. Level can make the rail horizontal met # a ane? a install The Track a. Concrete wall installation.
Installing Bi-Fold butt hinges on Prepare Your Doors the side for the doors (B Attach Steel Hangers to Your Doors Come with prevailed holes for hinge | Secure the hinges to the door with the supplied a. Install the hangers with prevailed the holes. Maximum door Flathead screws. thickness is (45mm), please add some bolt washers or cut the long door bolts to a suitable length to fit the door.
[5 Handle and Bottom Pivot Positions for Single Door a.Install the fixed screws on the wheel and track, b. Install the fixed screws on the wheel and track, Bottom pivot and bracket to prevent the door from falling fo prevent the door from falling Fold to the left side , the bottom pivot and bracket is Fold to the right side , the bottom pivot and on the left side. Drill the holes for handle on the right side. bracket is on the right side. Picture for your reference.
Handle and Bottom Pivot Position for Double Door a.Install the fixed screws on the wheel and track, to prevent the door from falling » Failure to wear proper safety gear protection) may Drill the holes for both handles as pictured result in serious injury or death. Always wear proper safety gear Pr-drilled holes for the bottom pivot and bracket before using power tools. « Improper operation of power tools may result in loss of control, serious injury or death.
