Instructions / Assembly

7
SingleDoorHangingandPositioningDoors
(Foldtotheleftside)
Wrench Wrench
“U”shapedscrew
(X1)
“L”shapedscrew
(X1)
C C
Foldtotheleftside，thebottompivotandbracketisontheleftside.Drilltheholes
forhandleontheleftsidePictureforyourreference.
Forasingedoor,bothrollersshouldbeinstalledattheedgeofthedoor.
Foryoursafety,pleasedoasthefollowing.thisistosecurethedoorfromfalling.
Note:
Beforehangingthedoorontherack:Forthefixeddoorside,positionthe“ U”
shapedscrewbetweenthewheelbarandtherack.Fortheotherside,positionthe
“L”shapedscrewbetweenthewheelbarandtherack.Thentightthesidesupwith
providedscrews.
“U”shapedscrew
“L”shapedscrew
(J-ShapeSingleDoor)
Bottompivot
andbracke