Instructions / Assembly

PrepareandInstalltheTracks
1
DrawLinefortheTrack
A
Track(X1)
Tapemeasure
Pencil Wrench
Placetherailagainstthewall,Usingalevel,drawalinefortheTrack,andusea
penciltomarkwheretheholesshouldbe.Makesuretheheightofholesonthe
wallisH+2-9/16"（H+65mm)
H+2-9/16"（H+65mm)
Levelcanmaketherailhorizontal
2
DrillTrackHoles
Drill
DrillBit
1/4"(6mm)
DrillBit
2/5"(10mm)
Then,pre-drill2/5"(10mm)holesintotheconcreteaccordingtoyourmarks
Note:
Concretewall:Drillholesbyusinga2/5"(10mm)concretedrillbit.
Woodframedwall:Drillouttheholesbyusingadrillwith1/4"(6mm)drillbit.
φ2/5"(10mm)
2"(50mm)
Bitdiameter:2/5"(10mm)
Boreholedepth:2"(50mm)