Instruction manual

Publication LOGIX-AP007B-EN-P - January 2007
Example Application 25
9. Sort the tags by name.
10. Find the tag execute_CF_Create_File.
11. Enter a 1 in the value field and press Enter.
The tag goes back to a 0. This indicates that the application has
attempted to create your file.
12. Find the tag CF_Create_Seq_Status.
13. Click + to expand the tag.
This is a user-defined data type (UDT). As the tag name indicates, this
will give you status on the create file sequence. There is an element of
the UDT called Overall_Status. At this point, it should be equal to 1.
This means that the file was created successfully.
If another value is present, refer to AppendixC, Troubleshoot the
CompactFlash File System.