User Manual

CIS Description
6-4 CompactFlash
®
Memory Card Product Manual, Rev. 10.0 © 2002 SANDISK CORPORATION
Attribute
Offset
Data 7 6 5 4 3 2 1 0 Description of Contents CIS Function
07Eh 0Ch R
0
R
0
R
0
R
0
U
1
S
1
V
0
No Vpp, Silicon Drive with Unique
Manufacturer/Serial Number
combined string
V=0:No Vpp Required
V=1:Vpp on Modify Media
V=2:Vpp on any operation
V=3:Vpp continuous
S:Silicon, else Rotating
U:ID Drive Mfg/SN Unique
Basic ATA Option Parameters
080h 0Fh R
0
I
0
E
0
N
0
P3
1
P2
1
P1
1
P0
1
All power down modes and power
commands are not needed to
minimize power.
P0:Sleep Mode Supported
P1:Standby Mode Supported
P2:Idle Mode Supported
P3:Drive Auto Power Control
N:Some Config Excludes 3X7
E:Index Bit is Emulated
I:Twin -IOis16 Data Reg Only
Extended ATA Option Parameters
082h 1Ah CISTPL_CONF Configuration Tuple Tuple Code
084h 05h Link Length is 5 bytes Link to next tuple
086h 01h RFS
00
RMS
00
RAS
01
Size of Reserved Field is 0 bytes,
Size of Register Mask is 1 Byte,
Size of Config Base Address is 2
bytes
RFS:Bytes in Reserved Field
RMS:Bytes in Reg Mask-1
RAS:Bytes in Base Addr-1
Size of fields byte (TPCC_SZ)
088h 07h TPCC_LAST Entry with Config Index of 07h is
final entry in table
Last entry of configuration table
08Ah 00h TPCC_RADR (lsb) Configuration Registers are Location of
08Ch 02h TPCC_RADR (msb)
located at 200h in Reg Space. Config Registers
08Eh 0Fh R
0
R
0
R
0
R
0
S
1
P
1
C
1
I
1
First 4 Configuration Registers are
present
I:Configuration Index
C:Configuration and Status
P:Pin Replacement
S:Socket and Copy
R:Reserved for future use
TPCC_RMSK
090h 1Bh CISTPL_CE Configuration Entry Tuple Tuple Code
092h 0Bh Link to next tuple is 11 bytes. Also
limits size of this tuple to 13 bytes.
Link to next tuple