User Manual

CIS Description
6-10 CompactFlash
®
Memory Card Product Manual, Rev. 10.0 © 2002 SANDISK CORPORATION
Attribute
Offset
Data 7 6 5 4 3 2 1 0 Description of Contents CIS Function
0FEh 61h LS
1
AS
2
N Ranges - 1
1
Number of Ranges is 2; Size of each
address is 2 bytes; Size of each
length is 1 byte.
AS:Size of Addresses
0:No Address Present
1:1Byte (8 bit) Addresses
2:2Byte (16 bit) Addresses
3:4Byte (32 bit) Addresses
LS:Size of length
0:No Lengths Present
1:1Byte (8 bit) Lengths
2:2Byte (16 bit) Lengths
3:4Byte (32 bit) Lengths
I/O Range Format Description
100h F0h 1st I/O Base Address (lsb) First I/O Range base is
102h 01h 1st I/O Base Address (msb) 1F0h
104h 07h 1st I/O Range Length - 1 8 bytes total ==> 1F0-1F7h I/O Length - 1
106h F6h 2nd I/O Base Address (lsb) 2nd I/O Range base is
108h 03h 2nd I/O Base Address (msb) 3F6h
10Ah 01h 2nd I/O Range Length - 1 2 bytes total ==> 3F6-3F7h I/O Length - 1
10Ch EEh S
1
P
1
L
1
M
0
Recommend IRQ
Level
Eh = 14
IRQ Sharing Logic Active in Card
Control & Status Register, Pulse and
Level Mode Interrupts supported,
Recommended IRQ's any of 0
through 15(F)
S:Share Logic Active
P:Pulse Mode IRQ Supported
L:Level Mode IRQ Supported
M:Bit Mask of IRQs Present
M=0 so bits 3-0 are single level,
binary encoded
TPCE_IR
10Eh 21h X
0
R
0
P
1
RO
0
A
0
T
1
Power-Down, and Twin Card.
T:Twin Cards Allowed
A:Audio Supported
RO:Read Only Mode
P:Power Down Supported
R:Reserved
X:More Misc Fields Bytes
TPCE_MI
110h 1Bh CISTPL_CE Configuration Entry Tuple Tuple Code
112h 06h Link to next tuple is 6 bytes. Also
limits size of this tuple to 8 bytes.
Link to next tuple
114h 02h I
0
D
0
Configuration Index
2
AT Fixed Disk Primary I/O 3.3V
configuration
TPCE_INDX