Product manual

Ordering Information and Technical Support
SanDisk CompactFlash Memory Card Product Manual Rev. 8 © 2001 SANDISK CORPORATION
100
System Software, Card Reader/Writers and Connectors
Compatible with SanDisk CompactFlash Memory Cards
Table 1 System Software with SanDisk CompactFlash Memory Card Support
Vendor Product Name Telephone
Number
AMI AMICARDZ 770-263-8181
Award/VMI Cardware 415-968-4433
Databook Card Talk for Databook Chip 508-762-9779
Phoenix Phoenix Card Manager Plus 714-440-8000
SystemSoft Card Soft 508-651-0088
Vadem Socket Services for
VG365, VG465, VG468
408-467-2100
Table 2 Card Readers/Writers Compatible with SanDisk CompactFlash Memory Cards
Below is a list of PC card reader/writers that are compatible with the SanDisk CompactFlash Memory
Card when used with a passive Type II adapter. These reader/writers can be installed in desktop PCs to
enable the CompactFlash Memory Card to be used in those systems. The CompactFlash Memory Card
will operate in any of these reader/writers when used with a passive Type II adapter.
Note: The SanDisk ImageMate, listed below, does not require use of a Type II adapter.
Vendor Country Telephone/FAX Number Product Model Product Type
Adtron United States 602-926-9324
FAX [phone]
http://www.adtron.com
SDDA
SDDB
SDDC
SDDL
SDDM
SDDP
SDDR
SDDS
Adapter for direct IDE-mode operation; 16-bit data
interface, BIOS compatible (no drivers); 3.5- or 2.5-
inch mount; can replace laptop hard drives.
IDE or ISA connected 8-bit drive; front access.
Industry standard ISA dual-slot adapter, rear entry,
cabled to front entry or 100% internal access.
External LPT port drive.
8-bit PC/104 drive.
16-bit PC/104 industry standard adapter.
External RS-232 drive.
Dual-slot SCSI bus drive; ATA card appears as
removable disk device; compatible with PC,
Macintosh and most workstations.
Altec Germany Country Code 49
(0) 511 98381-0
FAX [phone]
EasyDrive
PCBoardCard
i-Drive
PC/104 Drive
Triple slot (two Type II or one Type II and one
Type III) in 3.5-inch frame; IDE interface.
Dual slot (two Type II or one Type III) on ISA slot
card.
Dual slot (two Type II or one Type III) in a 3.5-inch
frame; SCSI-2 interface.
Dual slot (two Type II or one Type III) for PC/104
system bus.