Product manual

CompactFlash Memory Card Product Manual Preliminary
SanDisk CompactFlash Memory Card Product Manual Rev. 8 © 2001 SANDISK CORPORATION
12
2.0 Product Specifications
For all the following specifications, values are defined
at ambient temperature and nominal supply voltage
unless otherwise stated.
2.1 System Environmental Specifications
Standard Product
(SDCFB)
Industrial Product
(SDCFBI)
Temperature Operating:
Non-Operating:
0° C to 60° C
-25° C to 85° C
-40° C to 85° C
-50° C to 100° C
Humidity Operating:
Non-Operating:
8% to 95%, non-condensing
8% to 95%, non-condensing
8% to 95%, non-condensing
8% to 95%, non-condensing
Acoustic Noise: 0 dB 0 dB
Vibration Operating:
Non-Operating:
15 G peak to peak max.
15 G peak to peak max.
15 G peak to peak max.
15 G peak to peak max.
Shock Operating:
Non-Operating:
2,000 G max.
2,000 G max.
2,000 G max.
2,000 G max.
Altitude (relative to sea level) Operating:
Non-Operating:
80,000 feet max.
80,000 feet max.
80,000 feet max.
80,000 feet max.
2.2 System Power Requirements
Standard Product
(SDCFB)
Industrial Product
(SDCFBI)
DC Input Voltage (VCC)
100 mV max. ripple (p-p)
3.3V ±5% 5V ± 10% 3.3V ±5% 5V ±10%
+5 V Currents
(maximum Average value)
See Notes 1 to 3.
Sleep:
Reading:
Writing:
Read/Write Peak
200 µA
(Slow - Fast)
21 mA - 45 mA
21 mA - 60 mA
150 mA/50µs
500 µA
(Slow - Fast)
34 mA - 75 mA
34 mA - 90 mA
150 mA/50µs
200 µA
(Slow - Fast)
21 mA - 45 mA
21 mA - 60 mA
150 mA/50µs
500 µA
(Slow - Fast)
34 mA - 75 mA
34 mA - 90 mA
150 mA/50µs
Note 1. All values quoted are typical at ambient temperature and nominal supply voltage unless otherwise stated.
Note 2. Sleep mode currently is specified under the condition that all card inputs are statis CMOS levels and in a “Not Busy“
operating state.
Note 3. The currents specified show the bounds of programmability of the product.