Product manual

SanDisk

Corporation general policy does not recommend the use of its products in life support applications where in a failure or

malfunction of the product may directly threaten life or injury. Per SanDisk Terms and Conditions of Sale, the user of SanDisk

products in life support applications assumes all risk of such use and indemnifies SanDisk against all damages.

The information in this manual is subject to change without notice.

SanDisk Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or

consequential damages resulting from the furnishing, performance, or use of this material.

All parts of the SanDisk CompactFlash Memory Card documentation are protected by copyright law and all rights are reserved.

This documentation may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic

medium or machine readable form without prior consent, in writing, from SanDisk Corporation.

SanDisk and the SanDisk logo are registered trademarks of SanDisk Corporation. ImageMate, CompactFlash and CF are

trademarks of SanDisk Corporation.

Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of

their respective companies.

The SanDisk CompactFlash Memory Card is covered or licensed under one or more of the following U.S. Patent Nos. 5,070,032;

5,095,344; 5,168,465; 5,172,338; 5,198,380; 5,200,959; 5,268,318; 5,268,870; 5,272,669; 5,418,752; 5,602,987. Other U.S. and

foreign patents awarded and pending.

Lit. No. 20-10-00038 Rev. 8 9/2001 Printed in U.S.A.

Revision History

• Revisions before Rev. 5—initial release and general changes.

• Revision 5—general editorial changes, CF Type II information added, new higher capacities products added, some lower

capacities removed, new card reader/writer vendor added.

• Revision 6—added new 256 Mbit technology products, general and editorial changes.

• Revision 7—changes to Translate Sector command (page 73) and Device Control Register Enable bit (page 53)

• Revision 8—Removed CF Type II information, added new higher capacity products, removed some lower capacity products,

broadened temperature ranges for 3.3V and 5V operation, modified read & write timing specifications