Product manual

CompactFlash Memory Card Product Manual Preliminary

Table 4-14 Pin Replacement Changed Bit/Mask Bit Values

Initial Value Written by Host Final Comments

of (C) Status “C” Bit “M” Bit “C” Bit

0 X 0 0 Unchanged

1 X 0 1 Unchanged

X 0 1 0 Cleared by Host

X 1 1 1 Set by Host

4.4.5 Socket and Copy Register (Address 206h in

Attribute Memory)

This register contains additional configuration

information. This register is always written by the

system before writing the card’s Configuration

Index Register.

Socket and Copy Register Organization:

Operation D7 D6 D5 D4 D3 D2 D1 D0

Read Reserved 0 0 Drive # 0 0 0 0

Write 0 0 0 Drive # (0) X X X X

Reserved This bit is reserved for future standardization. This bit must be set to zero (0) by the software when the

Drive # This bit indicates the drive number of the card if twin card configuration is supported.

X The socket number is ignored by the CompactFlash Memory Card.