Product manual

CompactFlash Memory Card Product Manual Preliminary
SanDisk CompactFlash Memory Card Product Manual Rev. 8 © 2001 SANDISK CORPORATION
58
Table 6-2 Diagnostic Codes
Code Error Type
01h No Error Detected
02h Formatter Device Error
03h Sector Buffer Error
04h ECC Circuitry Error
05h Controlling Microprocessor Error
8Xh Slave Failed (True IDE Mode)
6.1.3 Erase Sector(s) - C0H
Bit -> 7 6 5 4 3 2 1 0
Command (7)
C0H
C/D/H (6)
1 LBA 1 Drive Head (LBA 27-24)
Cyl High (5)
Cylinder High (LBA 23-16)
Cyl Low (4)
Cylinder Low (LBA 15-8)
Sec Num (3)
Sector Number (LBA 7-0)
Sec Cnt (2)
Sector Count
Feature (1)
X
This command is no longer recommended for use
with 256 Mbit Flash technology. There is
essentially no net gain in the use of the Erase
Sectors Command and/or the Write Without Erase
Commands. This command is supported to
guarantee backward compatibility.