Product manual

Preliminary CompactFlash Memory Card Product Manual
SanDisk CompactFlash Memory Card Product Manual Rev. 8 © 2001 SANDISK CORPORATION
85
Attribute
Offset
Data 7 6 5 4 3 2 1 0 Description of Contents CIS Function
090h 1Bh CISTPL_CE Configuration Entry Tuple Tuple Code
092h 0Bh Link to next tuple is 11 bytes.
Also limits size of this tuple to
13 bytes.
Link to next tuple
094h C0h I
1
D
1
Configuration Index
0
Memory Mapped I/O
Configuration
Configuration Index for this
entry is 0. Interface Byte
follows this byte.
Default Configuration, so is not
dependent on previous Default
Configuration.
D:Default Configuration
I:Interface Byte Follows
TPCE_INDX
096h C0h W
1
R
1
P
0
B
0
Interface Type
0
Memory Only Interface(0),
Bvd's and wProt not used,
Ready/-Busy and Wait for
memory cycles active.
B:Battery Volt Detects Used
P:Write Protect Used
R:Ready/-Busy Used
W:Wait Used for Memory
Cycles
TPCE_IF
098h A1h M
1
MS
1
IR
0
IO
0
T
0
P
1
Vcc only Power; No Timing,
I/O, or IRQ;
2 Byte Mem Space Length;
Misc Entry Present
P:Power info type
T:Timing info present
IO:I/O port info present
IR:Interrupt info present
MS:Mem space info type
M:Misc info byte(s) present
TPCE_FS
09Ah 27h R
0
DI
0
PI
1
AI
0
SI
0
HV
1
LV
1
NV
1
Nominal Voltage Follows
NV:Nominal Voltage
LV:Mimimum Voltage
HB:Maximum Voltage
SI:Static Current
AI:Average Current
PI:Peak Current
DI:Power Down Current
Power Parameters for Vcc
09Ch 55h X
0
Mantissa
Ah = 5.0
Exponent
5h = 1V
Vcc Nominal is 5 Volts Vcc Nominal Value
09Eh 4Dh X
0
Mantissa
9h = 4.5
Exponent
5h = 1V
Vcc Nominal is 4.5 Volts Vcc Minimum Value
0A0h 5Dh X
0
Mantissa
Bh = 5.5
Exponent
5h = 1V
Vcc Nominal is 5.5 Volts Vcc Maximum Value