Product manual

Preliminary CompactFlash Memory Card Product Manual
SanDisk CompactFlash Memory Card Product Manual Rev. 8 © 2001 SANDISK CORPORATION
87
Attribute
Offset
Data 7 6 5 4 3 2 1 0 Description of Contents CIS Function
0BAh 1Bh CISTPL_CE Configuration Entry Tuple Tuple Code
0BCh 0Dh Link to next tuple is 13 bytes. Also
limits size of this tuple to 15 bytes.
Link to next tuple
0BEh C1h I
1
D
1
Configuration Index
1
I/O Mapped Contiguous 16
registers configuration
Configuration Index for this entry
is 1. Interface Byte follows this
byte.
Default Configuration, so is not
dependent on previous Default
Configuration.
D:Default Configuration
I:Interface Byte Follows
TPCE_INDX
0C0h 41h W
0
R
1
P
0
B
0
Interface Type
1
I/O Interface(1), Bvd's and wProt
not used; Ready/-Busy active but
Wait not used for memory cycles.
B:Battery Volt Detects Used
P:Write Protect Used
R:Ready/-Busy Used
W:Wait Used for Memory Cycles
TPCE_IF
0C2h 99h M
1
MS
0
IR
1
IO
1
T
0
P
1
Vcc Only Power Descriptors; No
Timing; I/O and IRQ present; No
Mem Space; Misc Entry Present
P:Power info type
T:Timing info present
IO:I/O port info present
IR:Interrupt info present
MS:Mem space info type
M:Misc info byte(s) present
TPCE_FS
0C4h 27h R
0
DI
0
PI
1
AI
0
SI
0
HV
1
LV
1
NV
1
Nominal Voltage Follows
NV:Nominal Voltage
LV:Mimimum Voltage
HB:Maximum Voltage
SI:Static Current
AI:Average Current
PI:Peak Current
DI:Power Down Current
Power Parameters for Vcc
0C6h 55h X
0
Mantissa
Ah = 5.0
Exponent
5h = 1V
Vcc Nominal is 5Volts Vcc Nominal Value
0C8h 4Dh X
0
Mantissa
9h = 4.5
Exponent
5h = 1V
Vcc Nominal is 4.5 Volts Vcc Minimum Value
0CAh 5Dh X
0
Mantissa
Bh = 5.5
Exponent
5h = 1V
Vcc Nominal is 5.5Volts Vcc Maximum Value