User manual

Page |

Commands for Manual entry:

sgpf, GP1, Output,none, LevelLow

sgpf, GP2, Output,none, LevelLow

sgpf, GP3, Output,none, LevelHigh

setDataInOut, COM3, CMD,SBF+NMEA

setDataInOut, COM2, RTCMv3,SBF+NMEA

setDataInOut, COM1, CMD ,SBF

setDataInOut, DSK1, CMD,SBF+NMEA

setCOMSettings, COM1, baud2400,BITS8,NO,BIT1,NONE

setCOMSettings, COM2,baud115200,BITS8,NO,BIT1, none (or RTS|CTS for V2)*

setCOMSettings, COM3, baud115200 ,BITS8 ,NO ,BIT1 , RTS|CTS

sdcu,lowlatency,20,auto,0

sem,PVT,10

sst,all

snt,all

spm,rover,all,geodetic1

srd,high

ssu,GPS+GLONASS+GALILEO

setFixReliability, RTK, 0.2, 4.4

snu,all,all

setPVTMode, Rover, all

setAntennaOffset, Main, 0.0000, 0.0000, 0.0000, "APS_APS-3 NONE", "APS-3", 0

setMarkerParameters,APS_, ,

setGeoidUndulation, manual,0.0

setFileNaming,DSK1,Incremental,ALTUS

eccf,current,boot