User guide

uEFI Shell CP6016 uEFI BIOS
Page 56 ID 1022-7205, Rev. 2.0
P R E L I M I N A R Y
kboardinfo
FUNCTION: Shows board identification data
SYNTAX: kboardinfo
DESCRIPTION: The kboardinfo command shows a summary of board-specific
identification data. It is especially useful for support queries because it
contains this data in a concentrated form.
USAGE: Shows board identification data
COMMAND / RESPONSE:
Shell> kboardinfo
KOMaOEMF rev.: 1
Board ID: 0xAD
Hardware rev.: 0x0
Logic rev.: 0x9
Boot flash: Boot flash 0
In system slot: No
Geographic Address: 3
Material number:
Hardware index:
Serial number:
EFI Material number:
EFI index: 10
NorthBridge.: 0x90
SouthBridge.: 0x2
RIO Module: 11x1
KOMaOEMF rev.: Revision of KOMaOEMF protocol
Board ID: Kontron board identification value (should
be 0xAD for the CP6016)
Hardware rev.: Hardware revision of this board
Logic rev.: Logic revision of this board
Boot flash: Current boot flash: either “Boot flash 0” or
“Boot flash 1”
In system slot: “Yes” if the board is plugged into the
system slot, otherwise “No”.
Geographic Address: Geographic address of the CPCI slot the
board is currently plugged into
Material number: Kontron hardware reference number
Hardware index: Kontron hardware index
Serial number: This board’s unique serial number
EFI Material number: Kontron uEFI reference number
EFI index: Version of this uEFI BIOS
NorthBridge.: Chip revision of the NorthBridge
SouthBridge.: Chip revision of the SouthBridge
RIO Module: Type of attached RIO module