Manual

rs30nmdl2sm-rev0614 Model RS30 Non-Metallic Page 1
Santoprene
®:
Injection molded thermoplastic elastomer with no fabric layer. Long mechanical ex life. Excellent abrasion 275°F -40°F
resistance. 88°C -40°C
Virgin PTFE: Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE: molten alkali metals,
turbulent liquid or gaseous uorine and a few uoro-chemicals such as chlorine triuoride or oxygen diuoride which readily liberate free 350°F -35°F
uorine at elevated temperatures. 177°C -37°C
Polypropylene 180°F 32°F
82°C 0°C
PVDF 250°F 0°F
121°C -18°C
Materials Maximum Minimum
Temperature Limits
For specic applications, always consult “Chemical Resistance Chart” Technical Bulletin
SANDPIPER
®
pumps are designed to be powered only by compressed air.
INTAKE/DISCHARGE PIPE SIZE
3" ANSI Flange or
80mm DIN Flange
CAPACITY
0 to 238 US gallons per minute
(0 to 901 liters per minute)
AIR VALVE
No-lube, no-stall
design
SOLIDS-HANDLING
Up to .71 in. (18mm)
HEADS UP TO
100 psi or 231 ft. of water
(7 bar or 70 meters)
DISPLACEMENT/STROKE
.9 US gallon / 3.41 liter
CAUTION! Maximum Operating Temperature Limit is 180°F for Polypropylene and 250°F for PVDF Models.
Quality System
ISO 9001 Certied
Environmental Man-
agement System
ISO 14001 Certied
RS30 Non-Metallic
Energy Saving Technology
Design Level1
Ball Valve
Air Operated
Double Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
CAUTION: Nonmetallic pumps and plastic components are not UV stabilized. Ultraviolet radiation can damage these parts and negatively affect material properties.
Do not expose to UV light for extended periods of time.
Maximum and Minimum Temperatures are the limits for which these
materials can be operated. Temperatures coupled with pressure affect the
longevity of diaphragm pump components. Maximum life should not be
expected at the extreme limits of the temperature ranges.