Assembly Instructions

Page 5
Step 5
-
Shelf Installation
Snap-It Storage Cabinets
Assembly Instructions
A) At the desired shelf height, insert 4 Shelf
Clips (S) into the slots located inside
the front edges of the Side and Back Panels.
See Fig. 1.
B) Angle a Shelf (G) into the cabinet above
the installed Clips with its rear tilted down.
C) Set the rear of the Shelf (I) onto the Shelf Clips (S)
placed in the Back Panels. See Fig. 2.
D) Tilt the Shelf (I) down until it rests on the
front Shelf Clips (S). If the Shelf is uneven,
reposition the Shelf Clips into appropriate
locations to level it.
E) Repeat this process for the remainder of
the shelves.
S -
Shelf Clip
Slots in
front and
back of
cabinet
Insert clips
into slots
Shelves rest on top
of clips
Angle the
back of
the shelf
downward
and rest it
on the rear
shelf clips
Tilt the front
of the shelf
downward
to rest it on
the front
shelf clips
Insert 4 Shelf
Clips (S) at
equal heights
Repeat the
process for the
other
shelves
G - Shelf
G - Shelf
G - Shelf
G - Shelf
G - Shelf
Fig. 1 - Shelf clip installation
Fig. 2 - Shelf installation