Instructions / Assembly

FIXED SHElF HANDLE
ASSEMBLY INSTRUCTION SHEET
IMPORTANT:
This part of cam should touch underside of shelf.
NOT BEHIND LEFT DOOR
NOTE: Please notice that one of the handles is a RIGHT lever rotation and
one is a LEFTlever rotation. Single handle cabinets have right lever rotation.
1. Determine right and left handle and with cam off shaft, attach proper
(right or left) handle to the right (facing) and left (facing) doors, using screws
provided.
2. With handle in straight down position slide cam over shaft (as shown
above) until it touches the underside of shelf. Tighten cam screw.
3. Proper installation should have the right door handle rotate to the right
and the left door handle rotate to the left.