User Manual CoroTurn® SL quick change Listen to the Silence For productive vibration free machining
Product Data Center of gravity Min length Dth Recommended overhang (from insert tip to clamping) Article 570-3C 80 880 570-3C 80 1200 570-3C 100 1100 570-3C 100 1500 570-3C 120 1900-80R/L 570-3C 150 2400-80R/L 570-3C 200 3200-80R/L 570-3C 250 4000-80R/L Rec.
Mounting of CoroTurn SL quick change cutting unit 30Nm Stop screw for adjustment (right style) Max f1 dimension mark (right- style) f1 adjustment screw Coolant outlet Open/Close Center-height setting Flats for center hight setting Alternatively, use serrations for center hight setting Tailstock center Center hight stick Flats for center hight setting Spirit level
Bars from Ø120 mm - Ø180 mm Bars from Ø200 mm Right or left style. Contact your salesman to order new front if you have to change the cut direction. Standard with hole pattern for Coromant Capto clamping unit C6-R/LC2090 -42060 Loosen the screws Right or left style, Turn the bar or the front 180 degrees. Easy to change front. How to turn the front 180 degrees? Loosen the front screws and then only turn the front.
