users guide Instruction Manual

61
Face grooving shank
holders
Intended for face grooving applications.
Available in 0° and 90°, right and left hand
style versions covering a large area of first
cut diameters.
Covers first cut diameter from 34–400 mm.
All made in B-curved version, A-curved ver-
sion to be ordered as Tailor Made or use the
modular CoroCut SL system where both A-
and B-curved blades are available.
Q-Cut toolholder type 151.37 offers a pro-
gram of 0° and 90° covering first cut from
24–200 mm. Also internal face grooving bars
with first cut down to 18 mm are available.
min.
max.
First cut diameters.
0° face grooving
shank holder.
L
L
A
R
B
L
A
R
B
B
A
R
B
R
L
A
0°
0°
90°
90°
The first cut must be made within the min. and max. limits for the holder, see the Main •
catalogue or separate marking on the holder.
Always start from the outer diameter and move towards the centre.•
Choose the correct tool (A or B sweep, right or left hand style) depending on your •
machine set-up and workpiece rotation. See the following illustration.
Practical hints