User Manual

11

of the stations stored in the preset memory.
Clock and Alarms
Setting the time format and date format
The clock display used in stand-by mode and on the playing mode screens can be set to 12 or 24 hour format. The
selected format is then also used when setting the alarms
1. Press and hold the Menu/ Info button
to enter the menu setting.
2. Rotate the Tuning control
until ‘CLOCK xxH’ appears on the display and press the Tuning control to
enter the setting. You will see the time format begins to flash.
3. Rotate the Tuning control
to select either 12 or 24 hour format. Press the Tuning control to confirm
your choice of clock format.
Note: If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting.
4. Press and hold the Menu/ Info button
to enter the menu setting.
5. Rotate the Tuning control
until a date (e.g. THU APR 3) appears on the display and press the Tuning
control
to enter the setting. You will see the date format begins to flash.
6. Rotate the Tuning control
to select the desired date format. Press the Tuning control to confirm your
choice.
Setting the clock time and date
1. Press and hold the Menu/Info button
.
2. Rotate the Tuning control
until ‘CLOCK ADJ’ appears on the display. Press the Tuning control to enter
the setting.
4. The hour setting on the display will begin flashing. Rotate the Tuning control
to select the desired hour, and
press the Tuning control
to confirm the setting. Then rotate the Tuning control to select the desired
minute, and press the Tuning control
to confirm the setting.