User Manual

13



press Tuning control knob

to confirm minute setting.

4. Rotate the Tuning control knob and the display will show the frequency options for the alarm.

The alarm options are as follows:

ONCE – the alarm will sound once

DAILY – the alarm will sound everyday

WEEKDAY – the alarm will sound only on weekdays

WEEKEND – the alarm will sound only at weekends

Press the Tuning control

to confirm the setting.

5. During radio alarm symbol is flashing, rotate Tuning control knob to select desired wake-up band and station, then

press Tuning control knob to confirm the selection.

6. Rotate Tuning control knob to select the desired volume and press Tuning control knob to confirm the volume. Radio

alarm setting is now completed.

Note: If new radio alarm station is not selected, it will select the last alarm station.

Note: If the selected AM/FM alarm station is not available when the alarm is sounding, the buzzer alarm will be used

instead.

b. Setting HWS (Humane Wake System) buzzer alarm:

A beep tone will activate when selecting the HWS buzzer alarm.

The alarm beep will sound shorter every 15 seconds for one minute followed by one minute silence before repeating

the cycle.

1. The buzzer alarm can be set either when the radio is on or off.

2. Press and hold the buzzer alarm button

, the symbol and the display hour will flash along with a beep.

3. During buzzer alarm symbol

flashes, rotate Tuning control knob to select the hour and press Tuning

control knob

again to confirm hour setting. Then rotate the Tuning control knob to select the minute and