User Manual

6

Battery Installation
Note:
Keeping back up batteries inside the compartment prevent stored data in preset memories from being lost.
1. Pull out the battery compartment locker to release battery compartment. There are main battery pack compartment
and back up battery compartment.
(Fig.?)
2. Remove back up battery compartment cover and insert 2 fresh UM-3 (AA sizes). Make sure the batteries are with
correct polarity as shown inside the compartment. Replace the battery cover.
3. After back up batteries are inserted, insert the main battery pack to power radio. The suitable battery packs for this
radio listed as the following table.
(Makita needs to confirm the below table for battery type and battery
operating table)
The following table indicates the operating time on a single charge in Radio mode
Battery
capacity
Battery Cartridge Voltage
7.2V 9.6V 10.8V 12V 14.4V 18V
1.0Ah BL7010
1.1Ah
BL1411G BL1811G
L1451 L1851
1.3Ah BL1013
BL1415 BL1815
BL1413G BL1813G
L1453 L1853
1.5Ah BL1815N
3.0Ah BL1430 BL1830
4.0Ah BL1440 BL1840
: Cluster Battery
: Slide Battery