User Manual

7

3-1. Installing or removing Slide battery cartridge (Fig. ?)
• To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into
place. Always insert it all the way until it locks in place with a little click.
• If you can see the red indicator on the upper side of the button, it is not locked completely. Install it fully until the red
indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.
• Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted
correctly.
• To remove the battery cartridge, withdraw it from the tool while sliding the button on the front of the cartridge or
pressing the buttons on both sides of the cartridge.
3-2. Installing or removing Cluster battery cartridge (Fig. ?)
• To insert the battery cartridge, align the tongue on the battery cartridge with the grove in the housing and slip it into
place.
• To remove the battery cartridge, take the battery out of the terminal while pressing the buttons on the side of cartridge.
4. Return the battery compartment locker to the original position.
5. Reduced power, distortion and a “stuttering sound” or low battery sign that appears on the display are all the
signs that the main battery pack needs to replace.
Note:
The battery pack can’t be charged via the supplied AC power adaptor.
6. When low battery sign
appears and an “E” keeps on flashing is the time to replace the back up batteries.
Using the soft bended rod antenna (Fig. ?)
Straight up the soft bended rod antenna as shown in the figure.
Using Supplied AC power adaptor (Fig. ?)
Remove the rubber protector and insert the adaptor plug into the DC socket on the left side of the radio. Plug the
adaptor into a standard mains socket outlet. Whenever the adaptor is used, the battery pack is automatically
disconnected. The AC adaptor should be disconnected from the main supply when not in use.
Note:
When your radio has any interference in AM band by its adaptor, please move your radio away from its AC adaptor
over 30 cm.