User's Manual

BB-100 will try to connect to the second last Bluetooth
source device.
Disconnecting your Bluetooth device
1. Press and hold the Bluetooth pairing button for 2 seconds on the radio to
disconnect with your Bluetooth device or turn off Bluetooth function on your
Bluetooth device to disable the connection. You will hear a beep and the
Bluetooth status indicator on the radio will flash a fast blue to show the radio is
discoverable again for pairing.
2. You can also press the Band/Step button to select any mode other than
Bluetooth mode to disable the connection.
Reset the radio
If your radio fails to operate correctly or some digits on the display
are missing or incomplete, please carry out the following procedure.
1. Make sure your radio is switched off.
2. Press and hold the Preset button 5 and Band/Step button at the same time
for more than 2 seconds, the “dEF” symbol will appear and flash. Continue
holding down these two buttons jointly until all the icons show on the display.
All saved preset stations and Bluetooth memory will be cleared and the radio
will revert to factory default settings.
Aux In socket
The Aux In socket is to connect audio source (like MP3 player or
CD walkman) to listen the audio program via the speaker.
Remove the rubber cover, connect the audio source with a 3.5 mm
audio connector wire, rotate the Volume Control knob to play the audio
program.
Note:
You need to plug in 3.5 mm audio connector wire in order to change
to the Aux in band.
Specifications
Frequency Coverage
FM: 87.50 – 108 MHz
AM: 520 – 1710 kHz (10 kHz)