User's Manual

the battery is inserted in accordance with the diagram shown.
Close the battery cover and fasten the fixture by turning clockwise.
If the radio is not to be used for any extended period of time, it is
recommended that the battery is removed from the radio.
Reduced power, distortion and a “stuttering sound” or low battery
sign is flashing on the display are all signs that the batteries
need replacing or recharged. (see below charge the batteries)
3. AC Operation
Before plug the AC power cord into the AC socket, be sure the
voltage is correct. If you have batteries in the radio and connect
the AC power cord into the AC socket, the batteries will automatically
be disconnected.
AC power cord storage is designed to store the cord when the radio
is not in use.
Charge the batteries
Reduced power, distortion and a “stuttering sound” or low battery
sign is flashing on the display are all signs that the batteries
need recharged if you use rechargeable batteries to power the radio.
Note:
The radio can be charged only when the radio is off.
Connect the AC power cord into the AC socket to charge the batteries.
Make sure the battery type switch is set to Charger position.
When the battery charge indicator LED flashes red, this indicates the batteries
are charging. Charging time takes approx. 6-10 hours depending on capacity
the rechargeable batteries in use. When the batteries are fully charged, the