H200 GB Version 1
GB The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SANGEAN ELECTRONICS INC. is under license.
2
Controls 1 2 3 4 5 6 7 8 NFC detection tag Battery status indicator Call answer-hangup button/Call indicator Battery charging indicator Bluetooth status indicator Max volume indicator Microphone Powered Speaker 9 10 11 12 13 14 15 16 Aux in socket DC In Power button Volume up button Volume down button Bluetooth button Folding handle Passive speaker GB Charging the unit This unit operates on a built-in Lithium-ion battery that can be recharged either using the USB charging port or from a USB power adapt
Power on the speaker There are two ways to power on your speaker. ● You can press and hold the Power button to turn on the speaker. ● In addition, the speaker can be powered on via NFC: Turn on the NFC feature on your NFC-enabled device > Hold your NFC-enabled device directly against the H200’s NFC tag for 2 seconds. Once the speaker is powered on successfully, the speaker will make a sound to confirm the power is on. Note: Some devices may ask for confirmation from the user.
4. Use the controls on your device to play/pause and navigate tracks. Note: 1. If 2 Bluetooth devices are pairing for the first time, both will search for the H200, it will show its available on both devices. However, if one device links with the speaker first, then the other Bluetooth device will not find the speaker on its list. 2. If you take your source device out of range, the connection will be temporarily disconnected to your speaker.
Pairing additional devices Before pairing another device to the speaker, you need to make the speaker discoverable. 1. Press and release the Bluetooth button to disconnect from your Bluetooth device. The Bluetooth status indicator ( ) blinks a fast flashing blue. 2. Activate Bluetooth on your device according to the device's user manual to link to the speaker. Locate the Bluetooth device list and select the device named ‘H200’. With some mobile devices which are equipped with earlier versions than BT2.
Pairing and playing your device via NFC Yo u r s p e a k e r i s e q u i p p e d w i t h w i r e l e s s N F C ( N e a r F i e l d Communication) feature, allowing NFC-enabled devices to pair and play the music with your H200. For non-NFC devices, please refer to the above sections for standard Bluetooth pairing. 1. Turn on the NFC feature on your device. 2. Touch the NFC area of your playing device GB directly against the NFC tag marked on the front panel of your H200.
Disconnecting your NFC-enabled device To disconnect your device, simply touch your device directly against the speaker’s tag again on the front panel. There will be a confirmation tone sound and the Bluetooth status indicator ( ) on the speaker will flash a fast blue to show the speaker is discoverable. Playing music via auxiliary input socket A 3.
Using the H200 as a hands-free speaker phone The H200 can be used as a hands-free accessory for your phone. When music is playing through your H200 and you receive a call on your phone it can pause the music automatically to allow you to answer your phone. 1. Pair your device to the speaker via Bluetooth as described in the previous sections. 2. If you receive a call while playing music through your H200, the Call indicator ( ) will flash a fast yellow. 3.
Safety information for the internal rechargeable Lithium-ion battery The internal rechargeable lithium-ion battery used in this device is able to supply power for a long period of time. However, even lithium-ion batteries reach a point where they cannot be recharged. If the battery does not recharge after several attempts, it may be drained (has a low charge), please contact info@sangean.com.tw for repair information.
For United States: Cautions to the user The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Specifications Amplifier Output power Frequency response 1.5W 100Hz~20kHz Aux In Input sensitivity 250mVrms @100Hz Speaker Speaker Passive speaker Bluetooth 57mm 4 ohm 3W Full range 93x93mm Bluetooth specification Profile Support Bluetooth® Ver 4.1 A2DP, HFP,HSP Bluetooth Audio CODEC Transmitting Power Line of sight range SBC, MP3 Specification Power Class 2 10 meters/30 feet Built-in Battery Battery Rechargeable Lithium-ion battery 18650 3.
GB Sangean reserves the right to amend the specification without notice. If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
